Jeep Grand Cherokee Commander Compass Headlight HID Xenon Ballast Control Device Module



When your original Jeep Grand Cherokee Commander Compass

oem xenon headlight low beam or HID bi-xenon have issues, like light failed, dipped beam not operating, flickering or have any other concerns, you only have to have to change or alternative connected original xenon sections like: ballast, fuel discharge bulb, igniter(Ignition) or wire harness, cable to mend your HID light is alright, no have to have to price tag a good deal of cash to acquire a whole brand name new headlight assembly like the car vendor propose.

Normally speaking, when your entrance headlight lamp have trouble, verify out the fuse initially, if it’s alright, then switch the manufacturing facility healthy xenon command unit box ballast is alright, simply because from our lots of years working experience, when the headlight not perform, 90% of the trouble is on the ballast.

In this online video, we currently listed up all the feasible original OEM xenon sections within. When your original portion fail, you should opt for the similar original portion to swap is alright. Will not go to opt for the aftermarket low-cost HID package. For the reason that if you use that, have to have to lower the original OEM wire circuit in the treatment of installation, and have to have to make holes on the water-proof deal with of the headlight assembly, soon after done all these will work, your headlight will be pretty soon to fail and have to have to change. It truly is not worth and eventually will price tag you substantially far more cash.

If you have any other concerns, you can check out our web-site http://www.oemxenonshop.com or electronic mail us at oemxenonshop@gmail.com

Many thanks.


Post time: Jun-27-2016