The Putco Pure LED tailgate bar
with brilliant and long-lasting LED’s and an easy set up this LED tailgate bar is sure to make people today behind you jealous.
The Putco Pure Led tailgate bar has two measurements, mini, or a full measurement truck tailgate bar, and arrives with purple(brakes and convert signals) or a white/purple(brakes, convert signals, reverse lights).
Will come with a minimal life span warranty.
Stay Knowledgeable and Signal Up:
Subscribe to our Channel: http://www.youtube.com/user/RealTruckCom
Abide by us on Fb: http://www.realtruck.com/facebook/?ut…
Abide by us on Twitter: http://www.realtruck.com/twitter/?utm…
Abide by us on Google+: http://www.realtruck.com/gplus/?utm_c…
Totally free Transport
Give us a simply call at 866-262-3738
Video clip Transcription:
Hey men, John in this article with RealTruck.com. These days I’m likely to exhibit you how to set up the Putco Pure LED light bar onto this GMC Sierra. The seriously awesome thing about this light bar is that it arrives with anything you require to set up it. You can find two solutions that you can go with in this article, either you can use sticky 3M tape-on stuff, which is what we are likely to use for application, or it also arrives with these brackets and screws that you can connect these and clip it in spot.
Which is likely to involve some drilling into your truck, and we don’t seriously want to drill into this new truck. We’re likely to use the tape-on stuff and plug it suitable into our trailer wiring, mainly because this has presently a trailer kit on it. We have one particular more wire that goes into our backup light, so we can hook that up.
First thing we are likely to do in this article is exam match this, to make sure where by we are likely to want it, and start out hooking this thing up. All suitable, appears superior. Let’s go forward, get the tape on this thing and get it put in up in in this article. We have bought our 3M double-sided tape connected to our light bar, what we are likely to do is go forward and peel all the tape off the back so we can set this thing on the truck.
We’re all set to set up our light bar unto a truck. A thing you want to fork out a seriously near awareness to is to make sure that you get this wiring harness onto the suitable facet of your decide on-up. If you don’t, when you convert you still left facet sign on, it’s likely to flash on the suitable facet back in this article. That just would not be awesome, amusing, but not awesome.
The seriously neat characteristics of this light bar is that it arrives with a pre-put in 4 way flat connector, so if you presently have a trailer wiring on your truck it’s just a subject of plugging this thing in. What we are likely to do is we are likely to set a small Dielectric compound on these, just to maintain the drinking water and humidity out of them.
We will plug her in in this article. We have bought that plugged in, the following thing we are likely to do is go forward and zip strip our wiring up beneath so it’s not all around. Then we are going to pull our taillight around in this article and connect our reverse light, so we get the full effect of this light bar.
So we can get the full perform of our light bar, we are likely to have hooking up our reverse light to the reverse light of the decide on-up. We could just use a scotch lock and set it on in this article. Locate your reverse light, obtain your set off wire, which in this one particular is the eco-friendly one particular, and just go forward and connect it. You can wrap all this with electrical tape, to get any humidity and such out of it.
Okay men, there you have it. Which is how easy and basic it is to set up the 60 inch Putco Pure LED light bar on your decide on-up. You can find only one particular thing still left to do, test how this thing will work, and recall, until following time, content motoring.
Post time: Aug-01-2016